Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Renault Clio 1.

Model: Renault Clio Clio 1, MK 1 - Years 1990-1998
Part: Headlight bulb

In the following guide, you will find a description of the procedure that allows you to correctly replace the headlight bulb of your first-generation Renault Clio. First, make sure you have a new, perfectly compatible bulb on hand, then lift the front hood and remove the dust cover located behind the headlight. Once you have done this, detach the bulb holder and proceed to replace the non-working bulb with the new one. Finally, reassemble both the bulb holder and the protective cover, and you are done.

Posted on 27 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Renault Clio 4
How to Replace the Front Headlamp Bulb on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the front headlamp bulb on the Renault Clio 4, open the bonnet and access the inside of the headlamp corresponding to the bulb to be repla…
How to Replace the Front Headlight Bulb on a Renault Clio 4?
How to Replace the Front Headlight Bulb on a Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the front headlight bulb on a Renault Clio 4, open the bonnet to access the rear of the headlight corresponding to the bulb to be replaced…
How to Replace the Front Bulb on the Renault Clio
How to Replace the Front Bulb on the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, you will see how to extract and replace the front headlamp bulb on the fourth series Renault Clio. Specifically, you will deal with the dipped…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos