Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse diagram for the Renault Captur?

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

In this video, you can see the fuse diagram and the location of the respective boxes in the Renault Captur, useful if you need to check the fuse of a malfunctioning device. The first main box is located inside the engine bay, protected by the cover situated to the right of the battery.

The second and final box is located inside the cabin, behind the panel at the bottom left of the dashboard. Always remember to use a replacement fuse of the same amperage as the one being replaced to avoid causing damage.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

Fuse Box Location and Diagram for the Renault Captur
Fuse Box Location and Diagram for the Renault Captur
Renault Captur (2019-2026 / MK 2) This guide will show you how to access the fuse box and find its diagram on the Renault Captur. First, open the bonnet of the vehicle and remove the …
Accessing the External Fuse Box of the Renault Captur
Accessing the External Fuse Box of the Renault Captur
Renault Captur (2013-2019 / MK 1) The instructions in this guide will show you how to access the external fuse box of the Renault Captur, including the diagram and layout. First, open…
Location and Fuse Diagram for the Renault Captur
Location and Fuse Diagram for the Renault Captur
Renault Captur (2013-2019 / MK 1) In today's tutorial video, you will see a guide to locate the fuse boxes, as well as find the diagram and layout for the Renault Captur. First, open …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos