Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Renault Laguna?

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Service warning light

In this tutorial, you will see how to reset the service light on the Renault Laguna 3. Before performing this simple operation, ensure you have completed all required maintenance tasks. Start by inserting the key and turning on the ignition. Then, using one of the two directional buttons located at the end of the wiper control lever, scroll through the display screens until you reach the one indicating "Service due". At this point, press and hold the down arrow button for about 15 seconds, or for as long as necessary for the service light to be correctly reset.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this tutorial, you will see how to reset the service light in the Renault Laguna, a very simple and quick operation to perform only after completi…
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) This brief video tutorial shows the procedure to reset the service light on a Renault Laguna, third generation model produced from 2007 to 2015. Firs…
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this tutorial, you will see how to reset the service light in the Renault Laguna, an extremely simple and quick operation, to be performed only af…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos