Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlamp Bulb on a Renault Megane

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Headlight bulb

Discover in this guide how to remove and replace the front headlamp bulb on a Renault Megane by following these simple and quick steps. First, open the bonnet of your car and start by removing the plastic cap found behind the headlamp; then disconnect the electrical connector of the dipped beam bulb, removing it along with the bulb holder, as illustrated in the video. At this point, replace the front headlamp bulb with a new one of the correct type (in this case, H7); then refit it inside the headlamp!

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Renault Megane 3?
How to Replace the Front Headlight Bulb on a Renault Megane 3?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the front headlight bulb on a Renault Megane 3, open the bonnet to access the engine bay and lower the lever located at the back of the he…
How to Change the Front Headlight Bulb on the Renault Megane
How to Change the Front Headlight Bulb on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Here are the instructions for removing and replacing the front headlight bulb on the Renault Megane in simple and quick steps. Access the front headl…
How to Replace the Front Headlamp Bulb on a Renault Megane 4?
How to Replace the Front Headlamp Bulb on a Renault Megane 4?
Renault Megane (2015-2023 / Megane 4, Megane IV) To replace the front headlamp bulb on a Renault Megane 4, open the bonnet to access the engine bay, specifically disconnect the rear part of the head…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos