Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Captur 1

Model: Renault Captur MK 1 - Years 2013-2019
Part: Service warning light

In this video, we will discover how to reset the service light for the routine maintenance oil change on the first generation Renault Captur. First, get inside the vehicle and turn on the ignition by pressing the start button once; then scroll with the arrows on the right lever until you reach the oil change maintenance option, where the mileage since the last change appears. At this point, press and hold the upper arrow button until the new mileage is set!

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Renault Captur
How to Reset the Service Light on Renault Captur
Renault Captur (2013-2019 / MK 1) To reset the "service" light on a Renault Captur, follow this procedure: turn on the ignition but do not start the engine; on the multifunction lever…
How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument panel to navigate through the menu: press the button located at the bottom of …
How to Reset the Service Light on the Renault Captur
How to Reset the Service Light on the Renault Captur
Renault Captur (2013-2019 / MK 1) In today's video, you will see how to reset the service light on the Renault Captur. First, get into the car and press the start button once. Now pro…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos