Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset TPMS on Renault Clio 4

Model: Renault Clio MK 4, Clio 4, Clio IV - Years 2012-2019
Part: Tire pressure warning light

When we realize that the low tire pressure warning light comes on on the instrument panel, we must proceed to check the actual inflation pressure and, if necessary, restore it and bring it back to the values set by the manufacturer. After carrying out this intervention, it will be necessary to reset the low pressure warning light that has come on on the instrument panel. To do this, you need to access the passenger compartment, sit in the driver's seat, turn on the ignition and select "reset tire pressure" with the up and down arrow keys on the ends of the right multifunction lever. Then hold down the up arrow button for a few seconds until the low tire pressure indication goes out.

Posted on 11 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light (TPMS) of the Renault Clio
How to reset the tire pressure warning light (TPMS) of the Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today we will see how to reset the tire pressure warning light (TPMS) of the Renault Clio; before performing the reset, it is necessary that all four…
Resetting the tire pressure warning of the Renault Clio.
Resetting the tire pressure warning of the Renault Clio.
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Today we will see, in this short and simple guide, the instructions that will allow us to reset the tire pressure warning of the Renault Clio; before…
How to reset the TPMS light of the Renault Clio 4
How to reset the TPMS light of the Renault Clio 4
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Today we will explain how to reset the TPMS light on the Renault Clio 4. To reset the light, we need to turn on the instrument panel and press the BC…

Other guides you may be interested in

How to Replace the Oil Sump on a Ford Focus

Follow these steps to remove and replace the oil sump on a Ford Focus engine. Lift the car on a column lift and (at your preferred height) use a socket wrench to unscrew the sump plug, allowing the oil to drain into a container (for disposal) and then re-screw the plug. Remove all the side plastics protecting the undercarriage using a battery or manual drill, then unscrew the fastening bolts around the perimeter of the oil sump. After removing the bolts from the sump, detach it from the engine block along with the gasket using a screwdriver as leverage. Clean everything and refit the new part.

Watch the video!


by ScegliAuto

More videos