Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

Video tutorial

In this tutorial, you will see how to replace the cabin filter in a Renault Kadjar, a very simple and quick operation. To do this, in addition to the correct replacement part, you will need a cross-head screwdriver.

First, move to the passenger side, then go under the dashboard and locate the long rectangular cover. At this point, unscrew the single indicated screw, remove the cover, and extract the old filter.

Install the replacement by following the reverse procedure, after cleaning the housing of any debris and dirt.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on the Renault Kadjar?
How to Replace the Cabin Filter on the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) Locate the cabin filter housing on your Renault Kadjar, which is situated directly beneath the glove compartment on the passenger side. The filter co…
How to Replace the Cabin Filter on a Renault Kadjar
How to Replace the Cabin Filter on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) To complete the replacement of the cabin air filter in your Renault Kadjar, you only need to follow a few simple steps outlined in this guide. First,…
How do you replace the cabin filter of the Renault Kadjar?
How do you replace the cabin filter of the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) The cabin filter on the Renault Kadjar can be replaced by finding the corresponding housing, which will be located immediately below the glove compar…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos