Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Master
  6. : How to release the spare wheel in the Renault Master van?

Renault Master - Video tutorial

Model: Renault Master MK 3 - Years 2010-2023
Part: Wheel
Operation: How to release the spare wheel in the Renault Master van?

In this tutorial we can see how to release the spare wheel in the Renault Master van, obviously useful in case of a puncture. To do this, we must first of all access the tools supplied with the vehicle, in fact we will need the long extension indicated as well as the key itself. Once you have found the necessary, let's move to the side of the right rear wheel and identify the hole on the back of the wheel arch. We then insert the extension into the hole, connect the key to the extension and turn everything counterclockwise. Once the wheel is released, unhook it from the rope.


Posted on 23 May 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos