Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Warning light – error code

If you have replaced the engine oil and the corresponding filter, you must then reset and update the timing for the next service. To do this, refer to the video and instructions provided below. After entering the cabin, insert the electronic ignition key to turn on the dashboard. Using the up and down arrow buttons on the right multifunction lever, select the 'Service required' option. Then press and hold the upward arrow until the service indication starts to flash, after which it will update.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Renault Megane?
How to Reset the Service Light on the Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) This tutorial shows how to reset the service light on the Renault Megane, a simple and quick operation to perform only after completing all required …
How to Reset the Service on the Renault Megane?
How to Reset the Service on the Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial, you will see how to reset the service on the Renault Megane, a very simple and quick operation to perform only after completing all…
How to Reset the Service Light on a Renault Megane
How to Reset the Service Light on a Renault Megane
Renault Megane (2002-2010 / Megane 2) In this tutorial, you will see how to reset the service light on a Renault Megane, an extremely simple and quick operation. Before doing this, ensure…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos