Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Internal Handle of the Renault Master?

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Handle

See other generations:
Video tutorial

To remove the internal handle of the Renault Master, first disconnect the internal locking mechanism using a flat screwdriver. Use the same screwdriver to pry off the plastic ring located at one end of the handle while simultaneously using a hook to unlock it. Now you can remove both the internal handle and the plastic ring.

To reassemble, first refit the internal mechanism you removed earlier, then attach the new handle, with or without the plastic ring depending on the model of handle you purchased.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How do you replace the external handle of the rear tailgate of the Renault Master?
How do you replace the external handle of the rear tailgate of the Renault Master?
Renault Master (2024-2026 / MK 4, XDD) In order to replace the external handle of the rear tailgate of the Renault Master, you need to open the corresponding tailgate so that the internal …
How to Replace the External Handle on a Renault Master
How to Replace the External Handle on a Renault Master
Renault Master (1997-2010 / MK 2) You can replace the external handle on the Renault Master by opening the door with the handle you intend to replace. Once the door is open, locate th…
How to Replace the Outer Door Handle of the Front Door on the Renault Master
How to Replace the Outer Door Handle of the Front Door on the Renault Master
Renault Master (2010-2023 / MK 3) In this guide, you will find instructions to dismantle and replace the outer door handle of the front door on the Renault Master. First, open the fro…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos