Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Renault Clio 4

Model: Renault Clio MK 4, Clio IV, Clio 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In this short video tutorial, you will see how to reset the service light on a Renault Clio 4. Start by closing all the doors and turning on the instrument panel without starting the engine. Use the scroll button located on the right lever of the steering wheel to select the "service interval" option.

Now, press and hold the button until the message "service in (total miles and months)" appears, release the button, then press it again, and the message will start to flash. Keep holding the same button until the message stops flashing; once it stops, the reset will have been completed.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) The procedure to reset the service light for a Renault Clio model 5 is straightforward and quick. First, turn on the instrument panel and then press …
Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) This brief guide will illustrate the procedure to reset the service light for the routine maintenance oil change on the Renault Clio. First, get in t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos