Do it yourself
| ||||
|
Renault Scenic - Video tutorial
Model: Renault Scenic
MK III, MK 3, Scenic III, Scenic 3
- Years 2009-2015 To replace the low beam bulb of the Renault Scenic X-Mod we start by checking the bulb to be replaced, we go to the back of the headlight, remove the plastic cover by pulling it, unhook the connector from the bulb, being careful not to pull the wires, unhook the clip that holds the bulb in place and remove the old bulb. We take the new bulb, remove it from the packaging, put it back in place of the old bulb with the flat side down, re-attach the clip so that the bulb does not move, re-attach the connector and put the plastic cover back on. Finally we can turn on the lights and check the new bulb if it works.
Posted on 18 September 2022 by ScegliAuto
How to replace the front headlight bulb of the Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today's information will show us how to disassemble and replace the low beam bulb of the Renault Scenic's front headlight. First, we open the car's e
Replacing the low beam on Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, MK 4, MK IV, Scenic 4) When working with the engine switched off and the handbrake applied, raise the front hood. Remove the round rubber cap located behind the low beam bu
Guide to replacing the front headlight bulb of the Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) Today's guide will show us the main steps useful for disassembling and replacing the headlight bulbs of the Renault Scenic. The video demonstrates th Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |