Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Renault Scenic.

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Headlight bulb

Below we will see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Renault Scenic. First, let's open the car hood and start disassembling and removing the front headlight by unscrewing the fastening screws and disconnecting the electrical connector; then we remove the plastic protective cap of the bulbs and unclip the metal spring, taking out the low beam light and replacing it with the new one (with the same fitting), as shown in the video. Finally, we reassemble the optical unit and check the functioning of the lights.

Posted on 24 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
How to replace the headlight bulb of the Renault Scenic
How to replace the headlight bulb of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Replacing the right front headlight bulb of the Renault Scenic MK3 model is a simple operation that can be done in a few minutes. To replace it, we n…
How do you replace the front headlight bulb of the Renault Scenic?
How do you replace the front headlight bulb of the Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To replace the headlight bulb of the Renault Scenic, you will need to open the hood to access the components inside the engine compartment. Once you …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos