Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the gear knob on the Renault Laguna?

Model: Renault Laguna Laguna 2, MK 2, X74 - Years 2001-2007
Part: Shift knob

In order to replace the Renault Laguna gear knob, you need to pry the lower part of the leather boot that wraps the gear lever, so that the fixing clips underneath can be detached. After the headset has therefore been released, it will be possible to lift it and rotate the gear knob anticlockwise, so that it too can be removed from its seat. At this point you can insert the new knob and then fix the clips of the gearshift gaiter to the base as well: in this way it will be possible to check that there are no problems during gear changes.

Posted on 20 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Renault Laguna (2001-2007 / Laguna 2, MK 2, X74) Below we will see the information that will allow us to disassemble and replace the gear lever knob of the Renault Laguna, in simple and quick steps.…
Renault Laguna (2007-2015 / MK III, Laguna 3, MK 3, Laguna III, X91) Today we will discover the necessary instructions to disassemble and replace the gear knob of the Renault Laguna, in simple and quick steps. First of…
Renault Laguna (2007-2015 / MK III, Laguna 3, MK 3, Laguna III, X91) To be able to replace the gear knob on the Renault Laguna, simply grab the old knob and move it slightly first to one side and then to the other to b…

Other guides you may be interested in

How to Replace the Bulbs on a Nissan Almera Rear Light

Do you want to change the damaged bulb of a rear light on a Nissan Almera? Follow this video carefully to proceed correctly. Open the boot, remove the fabric side covering, and detach the plastic rivets on the covering. Unscrew the retaining bolts of the rear light using a socket spanner. Once the light is free from the bolts, pull the rear light out of the metal housing, then disconnect the power cable. Place the stop light on a comfortable surface and replace all worn bulbs. To refit the rear light, position it in its housing and tighten all screws after reconnecting the lighting connector.

Watch the video!


by ScegliAuto

More videos