Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob of the Renault Laguna?

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Shift knob

To replace the gear knob of the Renault Laguna, simply grasp the old knob and move it slightly from side to side to release the internal clips that secure it to the lever. Once the internal clips are released, the knob can be completely removed from its housing. At this point, position the new knob onto the lever, securing the internal clips. After the knob is correctly positioned, ensure it does not cause issues during gear changes while driving.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Renault Laguna
How to Replace the Gear Knob on a Renault Laguna
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) To replace the gear knob on a Renault Laguna, you need to pry at the bottom of the leather gaiter that surrounds the gear lever, so that the underlyi…
How to Remove the Gear Knob from a Renault Laguna
How to Remove the Gear Knob from a Renault Laguna
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) Before you begin, sit in the front passenger seat of your Renault Laguna and pull the handbrake. Start by detaching the gaiter from the gear lever. T…
How to replace the gear knob of the Renault Laguna
How to replace the gear knob of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) Below we will see the information that will allow us to disassemble and replace the gear lever knob of the Renault Laguna, in simple and quick steps.…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos