Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on the Renault Laguna

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Shift knob

See other generations:
Video tutorial

Today, we will discover the necessary instructions to remove and replace the gear knob on the Renault Laguna in simple and quick steps. First, get inside the vehicle and start by pulling the gear knob upwards with force to detach and remove it; then install the new gear knob, securing it properly onto the lever, as illustrated in the video.

Ensure that the spring is inserted before the gear knob; at this point, make sure there is no play between the lever and the knob, following the video tutorial to the end!


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to replace the gear knob of the Renault Laguna
How to replace the gear knob of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) Below we will see the information that will allow us to disassemble and replace the gear lever knob of the Renault Laguna, in simple and quick steps.…
How to Replace the Gear Knob on a Renault Laguna
How to Replace the Gear Knob on a Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) To replace the gear knob on a Renault Laguna, you need to pry at the bottom of the leather gaiter that surrounds the gear lever, so that the underlyi…
How to Remove the Gear Knob from a Renault Laguna
How to Remove the Gear Knob from a Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) Before you begin, sit in the front passenger seat of your Renault Laguna and pull the handbrake. Start by detaching the gaiter from the gear lever. T…

How to Replace the Thermostat on the Mercedes B-Class

Today, let's go through the main steps to remove and replace the thermostat on the Mercedes B-Class with a diesel engine. First, open the bonnet and begin by removing the control unit located at the top right by unscrewing the screws and disconnecting the wiring. Then, unscrew the thermostat screws and disconnect the coolant pipe as shown in the video. At this point, install the new thermostat and refill with fresh engine coolant, filling to the maximum level mark on the reservoir.

Watch the video!


by ScegliAuto

More videos