Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Renault Clio MK 2, Clio 2 - Years 1998-2005
Part: Cabin air filter

The cabin air filter is located on the passenger side, just below the windscreen: open the front bonnet, pull the seal from the rear edge, unclip the plastic protective grille, and remove the cap of the cabin air filter container (it is secured with two screws); then extract the old filter, remove any dirt residue, insert the new filter respecting the airflow direction, and reposition the cap, securing it with the respective screws; finally, reassemble the plastic grille and the seal. When replacing the cabin air filter, it is also advisable to sanitise the cabin with a suitable germicidal spray.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the cabin filter in the Renault Clio.
Replacing the cabin filter in the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) There are two types of cabin air filters available on the market, which can be purchased from an authorized dealer: (white ones called pollen filters…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The cabin air filter is located behind the centre tunnel console and does not require the removal of any covers for replacement; access the cabin fro…
How to replace the cabin filter of the Renault Clio.
How to replace the cabin filter of the Renault Clio.
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video tutorial, we can see how to replace the cabin air filter in a Renault Clio. The first thing to do is to purchase a new cabin filter. Th…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos