Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Cabin air filter

The cabin air filter is located behind the centre tunnel console and does not require the removal of any covers for replacement; access the cabin from the passenger side and locate the filter at the back of the footwell: what appears to be the cap of the filter container is actually part of the filter itself; grasp the plastic tab and pull the filter from its housing, ensure there are no dirt residues inside the filter housing, and insert the new one (active carbon filters are recommended) aligning it according to the airflow direction.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Renault Clio (1998-2005 / Clio 2, MK 2) .. reassemble the plastic grille and the seal. When replacing the cabin air filter, it is also advisable to sanitise the cabin with a suitable germicidal.. …
How to Change the Cabin Filter on a Renault Clio
How to Change the Cabin Filter on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) .. Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing.. …
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Renault Clio (1998-2005 / Clio 2, MK 2) The cabin air filter is located in the engine compartment, on the passenger side, just below the windscreen: first, remove the seal on the edge, then…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos