Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on a Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

To reset the oil change service light on a Renault Clio, follow this procedure: Turn the ignition key (just switch on the dashboard), locate the two buttons with the arrows "up" and "down" on the right side of the steering wheel control lever, and repeatedly press one of the arrows until the "service interval" message appears on the display. At this point, press and hold the button with the arrow for at least five seconds until the "service request" message appears and the spanner light illuminates. Finally, press and hold the button with the arrow for at least 10 seconds until the new service interval is updated. Lastly, turn the key and switch off the dashboard.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before you begin, sit in the driver's seat of your Renault Clio. Start by turning on the ignition by turning the key in the ignition barrel. Next, wa…
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos