Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How are the longitudinal bars installed on the Fiat Seicento?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Roof rack bars

In order to install the longitudinal bars of the Renault Clio you must first of all insert the pins at the ends of the bars, so that they are fixed with the appropriate screws. Once the pins are in place, the seals along the door pillars can be lowered. Below them, you will find the housings in which you will have to insert the fixing screws of the pins, which will allow you to lock the bars in the upper part of the car. After installation it will be necessary to check that the doors close without any problem.

Posted on 2 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you install the rearview camera of the Renault Clio?
How do you install the rearview camera of the Renault Clio?
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) In order to install the rear camera on the Renault Clio, you need to insert the device into the appropriate housing, which is located in the upper ce…
How do you install the rearview camera of the Renault Clio?
How do you install the rearview camera of the Renault Clio?
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) In order to install the rear camera of the Renault Clio, you need to position it in its housing: this will be located immediately above the license p…
How to install 2Din car stereo on Renault Clio
How to install 2Din car stereo on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, let's see how to disassemble and replace the stock car radio with a 2Din Renault Clio, following the instructions below. First of all,…

How to Replace the Air Filter on a Ford Fiesta

How to replace the engine air filter on a Ford Fiesta? Follow this guide. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Using a screwdriver, undo the soundproofing panel (where the air filter is located), disconnect the engine air intake hose and the metal clip pin. Remove the panel with the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reassemble the air box panel and tighten the screws. Close the front bonnet.

Watch the video!


by ScegliAuto

More videos