Do it yourself
Frequently asked questions about cars and motorcycles

How do you install the rearview camera of the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Checks and maintenance

In order to install the rear camera of the Renault Clio, you need to position it in its housing: this will be located immediately above the license plate, inside the recess here. Once it has been inserted and secured, you can run the cables from inside the rear tailgate and connect them to the corresponding headlight; the other cables will need to run from inside the cabin to the display located in the center of the dashboard. Once the connection is made, you can verify that the camera is functioning correctly.

Posted on 24 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) An aftermarket purchase undoubtedly among the most common and useful, in reference to cars, including the Renault Clio 3, is the rearview camera. Wit…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to install the rear camera on the Renault Clio, you need to insert the device into the appropriate housing, which is located in the upper ce…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This brief video guide shows the necessary steps to install a reverse camera kit on a fourth-generation Renault Clio, produced from 2012 to 2019. Thi…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos