Do it yourself
Frequently asked questions about cars and motorcycles

How do you install the rearview camera of the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Checks and maintenance

In order to install the rear camera on the Renault Clio, you need to insert the device into the appropriate housing, which is located in the upper center relative to the license plate. Once the rear camera is inserted, you need to connect the power cable to one of the two rear lights. After the connection, you can pass the other cable from inside the rear door to the interior of the car: it should reach the inside of the stereo, hiding the cable with the door pillars. After the connection, you need to verify that everything is working properly.

Posted on 10 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The demonstrative video available to watch here was shot with a Renault Zoe, but given the technical and structural characteristics, it can easily be…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) An aftermarket purchase undoubtedly among the most common and useful, in reference to cars, including the Renault Clio 3, is the rearview camera. Wit…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The Medianav Renault system, also available in the Renault Clio 4, is responsible for managing all the infotainment present in the car and the inform…

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos