Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace Renault Clio rear light bulb?

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Rear light bulb
Operation: How to replace Renault Clio rear light bulb?

To proceed with the replacement of the position lights of the rear light, it is necessary to follow the instructions below: open the tailgate, identify the light on which to change the bulb and at the back there is a butterfly nut that must be unscrewed to then be able to extract by pulling the light unit towards you. Then remove the power connector and release the bulb support plate by loosening and widening the tabs on the side. At this point it will be possible to access the bulbs, to remove them it is necessary to push them down and turn them a quarter of a turn.


Posted on 24 November 2022 by ScegliAuto



How to replace the rear brake light bulb of the Renault Clio 2015.
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) If the rear brake light bulb of your 2015 Renault Clio has stopped working and you want to replace it yourself, then you just need to follow the proc
How do you replace the rear light bulb on the Renault Clio 3?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To be able to replace the rear light bulb on the Renault Clio 3, you need to open the boot lid and loosen the screws located between the seal and the
How to replace the headlight bulb on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before we can start, we will have to go and open the front hood of our Renault Clio. So let's start by disengaging and removing the rear cover of the

    Frequently Asked Questions

    • Clio 2005-2013 - What is the fuse for the reverse lights on the Renault Clio 3? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos