Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on the Renault Twingo I?

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Windshield wipers

See other generations:
Video tutorial

To carry out this operation, keep the vehicle turned off and the handbrake engaged. Pull the wiper arm upwards and remove the blade by simply pulling down so that the clip comes out of its housing.

Rest the wiper arm on the glass, placing it on a piece of paper to avoid damaging the glass. You can find it on Auto Doc, for example, for £6.03, but with £9.95 delivery charges.

At this point, all you need to do is clip the new blade back into the wiper arm, following the instructions in the video. Close the clip and replace it. Follow the same procedure for the rear wiper: the front and rear pair can be found on Amazon for just £11.98 plus £3.99 delivery.

Here, there is no hook to attach the blade; it is simply a pressure fit with a clip, making it even easier. Operation completed.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Renault Twingo 1
How to Replace the Front Wipers on the Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) In this video, see how to remove and replace the front wipers on a first-series Renault Twingo in simple and quick steps. First, lift the wiper arm t…
How to replace the wipers of the Renault Twingo 2
How to replace the wipers of the Renault Twingo 2
Renault Twingo (2007-2014 / Twingo 2) In this new guide of ours, we will discover the various steps you need to take if you intend to replace the windshield wipers of your second edition …
How to Replace the Wiper Blades on the Renault Twingo II
How to Replace the Wiper Blades on the Renault Twingo II
Renault Twingo (2007-2014 / Twingo 2) Learn how to change the wiper blades on the Renault Twingo II: simply press the button located on the front of the wiper to release the blade from it…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos