Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp on a Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Headlight

To replace the front headlamp on a Renault Twingo, open the bonnet to access the screws securing the headlamp unit from the top. Once these screws are removed, proceed to loosen the screws that secure the bumper; these screws are located at the bottom and inside the front wheel arches. After removing the bumper, you can unscrew the screws that secure the headlamp from underneath, disconnect the internal connectors, and replace it with a new spare part.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlights on a Renault Twingo?
How to Remove the Front Headlights on a Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial, you will learn how to remove the front headlights on a Renault Twingo. First, ensure the key is not inserted, then remove the two p…
How to adjust the headlight position of the Renault Twingo
How to adjust the headlight position of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) We will explain how to adjust the headlight position of the Renault Twingo model mk2. To perform this simple operation, we need to turn on the car's …
How to Replace the Fog Light Bulb on a Renault Twingo 1
How to Replace the Fog Light Bulb on a Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) If one of the fog light bulbs on your first-generation Renault Twingo has stopped working suddenly, you need to replace it with a new one as soon as …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos