Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Laguna
  6. : How do you remove the Renault Laguna headlight?

Renault Laguna - Video tutorial

Model: Renault Laguna MK 3, Laguna III, Laguna 3, MK III, X91 - Years 2007-2015
Part: Headlight
Operation: How do you remove the Renault Laguna headlight?

Removing the headlight on the Renault Laguna is done by opening the hood, so that we can access the screws that hold the entire headlight assembly inside its housing. Once its screws have been loosened, all the various front spotlights can be removed from inside the optical unit, by disconnecting the appropriate power cables. Once the spotlights have been removed, the new spare parts can be inserted inside the optical unit, fixing them with the appropriate screws. Finally it will be necessary to connect all the components, verifying that they work correctly.


Posted on 27 December 2022 by ScegliAuto



How do you replace the headlight bulb on a Renault Laguna?
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) Replacing the headlight bulb on the Renault Laguna is done by opening the hood, so that access can be gained to the interior of the headlight corresp
How do you replace the headlight bulb on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) Replacing the headlight bulb on the Renault Laguna is done by opening the hood of the car, so that you have access to the screws that hold the corres
How do you replace the headlight bulb on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) Replacing the headlight bulb on the Renault Laguna is done by opening the bonnet, so that you can access the components located in the rear part of t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos