|
Do it yourself
| |||
| ||||
How to Reset the TPMS Warning Light on the Renault Captur
Model: Renault Captur
MK 1
- Years 2013-2019
When you notice the low tyre pressure warning light illuminating on the instrument panel, check the pressure of all four tyres and, if necessary, restore the minimum pressure recommended by the manufacturer. Then, follow the instructions below to reset the warning on the display of the instrument panel. First, access the driver's seat and turn on the ignition. On the multifunction lever terminal located to the right of the steering wheel, there are two buttons marked with the down arrow, and still on the right side of the steering wheel, there are two buttons to scroll through the various menu functions. Select the option to reset the minimum tyre pressure, and to save the new setting, press and hold the button with the up arrow located on the multifunction lever terminal on the right.
Updated on 3 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Captur
(2019-2026 /
MK 2)
In this mini guide dedicated to your Renault Captur second generation (2019-2023), discover how to correctly reset the tyre warning light (also known…
Renault Captur
(2013-2019 /
MK 1)
In this video tutorial, you will see how to reset the tyre pressure light on the first series Renault Captur, as well as on the Clio 4; before perfor…
Renault Captur
(2019-2026 /
MK 2)
When the tire pressure warning light comes on a 2020 Renault Captur vehicle, it means that the tire pressure needs to be adjusted. After that, you ca…
Other guides you may be interested in
|
How to Remove the Airbag from Citroen C3
To remove the airbag from a Citroen C3, follow these steps, which you can also see in the attached video. Check the warning light: before proceeding, ensure that the airbag warning light is off and that the horn functions correctly. Disconnect the battery: disconnect the battery to ensure safety during the operation. Locate the holes behind the steering wheel: find the two holes located behind the steering wheel. Insert a long screwdriver: insert a long screwdriver into the holes and press firmly to unlock the internal clips. Remove the airbag: at this point, you can remove the airbag from the steering wheel and disconnect the two internal connectors. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.401
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
