Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Renault Captur - Clio

Model: Renault Captur MK 1 - Years 2013-2019
Part: Tire pressure warning light

In this video tutorial, you will see how to reset the tyre pressure light on the first series Renault Captur, as well as on the Clio 4; before performing the reset steps, ensure that all four tyres are at the correct operating pressure. Then, get in the car and turn on the ignition; scroll through the on-board computer menu using the arrow button until you reach the tyre pressure option. At this point, press and hold the button until the TPMS light disappears from the instrument cluster, as shown in the video!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Renault Captur?
How to reset the tyre pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the tyre pressure warning light on the Renault Captur, first inflate all the tyres to the correct pressure value: once they are inflated, yo…
How to reset the tire pressure sensor on the Renault Captur
How to reset the tire pressure sensor on the Renault Captur
Renault Captur (2013-2019 / MK 1) .. (TPMS) of the Renault Captur, but also of the Clio; before performing the reset, it is necessary that all four tires are at the operating pressure... …
How do you reset the tire pressure warning light on the Renault Captur?
How do you reset the tire pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) By inflating all the tires of the Renault Captur to the correct pressure value, it will be possible to start the procedure to reset the tire pressure…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos