Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on the Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Tire pressure warning light

Below we discover the instructions that will show us how to reset the tire pressure warning light (TPMS) of the Renault Captur, but also of the Clio; before performing the reset, it is necessary that all four tires are at the operating pressure. So let's get on board the car and start turning on the instrument panel; use the down arrow button located on the right lever to scroll through the options until you reach the tire pressure one, as shown in the video. All we have to do is hold down the same button until the warning light stops flashing.

Posted on 7 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the pressure warning light on the tracker in a Renault Captur?
How do you reset the pressure warning light on the tracker in a Renault Captur?
Renault Captur (2019-2026 / MK 2) If the tire pressure warning light on your Renault Captur comes on, it is not always a serious fault, but it could just be an indication that the tir…
How do you reset the tire pressure warning light on the Renault Captur?
How do you reset the tire pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To completely remove the tire pressure sensor from the instrument panel of the Renault Captur, you will first need to inflate all the tires, bringing…
How to reset the tire pressure sensor of the Renault Captur 2022
How to reset the tire pressure sensor of the Renault Captur 2022
Renault Captur (2019-2026 / MK 2) To correctly complete the manual reset of the tire pressure warning light on your Renault Captur second edition (year 2022), all you need to do is fo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos