Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part:

It will be possible to reset the tire pressure warning light of the Renault Captur by inflating the tires until they reach the recommended pressure value: once the inflation is done, you can turn on the instrument panel by turning the ignition key in the corresponding slot. Once the panel is on, you will need to press the button on the lever to the right of the steering wheel repeatedly: once the tire pressure message is displayed, you can hold down the button to make the warning light disappear.

Posted on 1 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Renault Captur?
How do you reset the tire pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) The tire pressure warning light that appears on the instrument panel of the Renault Captur can be reset by first inflating all the tires until they a…
How do you reset the tire pressure warning light on the Renault Captur?
How do you reset the tire pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) In order to reset the tire pressure warning light of the Renault Captur, you need to inflate the tires until they reach the correct pressure value: t…
How do you reset the tire pressure warning light on the Renault Captur?
How do you reset the tire pressure warning light on the Renault Captur?
Renault Captur (2019-2026 / MK 2) The tire pressure warning light that appears on the instrument panel of the Renault Captur can be reset by inflating the tires to the recommended pre…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos