Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulbs on the Renault Scenic

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Tail light bulb

In this guide, find the instructions to remove and replace the third brake light and its bulbs on the Renault Scenic by following these simple steps. First, open the bonnet and unclip the two metal tabs found inside the holes to remove the third brake light from the outside; then disconnect its electrical connector, as shown in the video. At this point, separate the bulb holder from the light unit, accessing the LED bulbs; replace them and remount the third brake light, applying the reverse procedure!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light on a Renault Scenic
How to Replace the Third Brake Light on a Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this video, you will learn how to replace the third brake light on the French manufacturer's MPV, the Renault Scenic third series. Start by openin…
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today's instructions will allow us to remove and replace the bulbs of the rear headlamp on the Renault Scenic. First, open the rear tailgate of the b…
Disassembly of the rear headlight of the Renault Scenic
Disassembly of the rear headlight of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today we will see the steps that will allow us to disassemble and replace the rear taillight and its bulbs of the Renault Scenic. First of all, we op…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos