Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Rear Headlamp Bulbs on the Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

See other generations:
Video tutorial

Today's instructions will allow us to remove and replace the bulbs of the rear headlamp on the Renault Scenic. First, open the rear tailgate of the boot and start unscrewing the fixing screws found on the side of the lamp; disconnect the electrical connector of the lights to remove it, as shown in the video.

At this point, separate the bulb holder from the lens, replacing any faulty bulbs with new ones (having the same fitting); then reassemble the rear lamp and check the operation of the stop lights!


Posted on 14 February 2026 by ScegliAuto


Related tutorials

Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this guide, follow the steps to remove and replace the rear headlight bulbs on the Renault Scenic. First, open the boot and start by removing the …
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) These short and simple instructions will show us the process of disassembling and replacing the bulbs of the rear light of the Renault Scenic. First …
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to remove the front headlamp bulb from a Renault Scenic. Lift the front bonnet of the car and locate the front headlamp bulbs. Find the…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos