Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlight Bulbs on the Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

See other generations:
Video tutorial

In this guide, follow the steps to remove and replace the rear headlight bulbs on the Renault Scenic. First, open the boot and start by removing the plastic cap found on the tailgate panel; then unscrew the plastic screw to remove the light unit, disconnecting the electrical connector for the bulbs as shown in the video.

At this point, replace the rear lights if necessary; similarly, remove the position light unit, following the video tutorial to the end!


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to replace the rear lights and bulbs of the Renault Scenic
How to replace the rear lights and bulbs of the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today we will discover the instructions for disassembling and replacing the rear light and its bulbs of the Renault Scenic and Grand Scenic. First, o…
How to replace the rear headlight bulb of the Renault Scenic 3
How to replace the rear headlight bulb of the Renault Scenic 3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the rear headlight bulb of the Renault Scénic model 3, we need to open the trunk and unscrew the three screws located along the side of th…
How to Remove the Rear Headlight on the Renault Scenic
How to Remove the Rear Headlight on the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) To remove the rear headlight on a Renault Scenic 2, follow these general steps. Open the boot lid: this is essential to access the screws securing th…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos