Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights and bulbs of the Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

Today we will discover the instructions for disassembling and replacing the rear light and its bulbs of the Renault Scenic and Grand Scenic. First, open the rear hatch of the trunk and start unscrewing the two fixing screws located on the side of the light; then unscrew the plastic screw located on the side of the luggage compartment, as shown in the video.

At this point, disconnect the electrical connector to remove the headlight, separating the bulb holder from the ceiling light to access the bulbs; replace any faulty bulbs with new ones!


Posted on 15 April 2025 by ScegliAuto


Related tutorials

Replacement of the rear taillight bulbs of the Renault Scenic
Replacement of the rear taillight bulbs of the Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) These short and simple instructions will show us the process of disassembling and replacing the bulbs of the rear light of the Renault Scenic. First …
How to Replace the Rear Lights on the Renault Grand Scenic?
How to Replace the Rear Lights on the Renault Grand Scenic?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) In this tutorial, you will see how to replace the rear lights on the Renault Grand Scenic, an extremely simple and quick operation. First, ensure tha…
How to Replace the Rear Lights and Bulbs of the Renault Scenic
How to Replace the Rear Lights and Bulbs of the Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) This guide shows the procedure for removing and replacing the rear lights and their bulbs on the Renault Scenic. First, open the boot and start unscr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos