Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear taillight bulbs of the Renault Scenic

Model: Renault Scenic MK IV, Scenic 4, MK 4, Scenic IV - Years 2016-2022
Part: Tail light bulb

These short and simple instructions will show us the process of disassembling and replacing the bulbs of the rear light of the Renault Scenic. First of all, we open the rear hatch of the trunk and start removing the side plastic cover of the luggage compartment; then we unscrew the fixing screw of the rear light, as shown in the video. At this point, we unscrew the side screws of the light to detach and remove it, disconnecting the electrical connector of the bulbs found on the back; then we separate the bulb holder from the light fixture to replace the rear bulbs!

Posted on 15 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights and bulbs of the Renault Scenic
How to replace the rear lights and bulbs of the Renault Scenic
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) The instructions in this guide will show us the procedure for disassembling and replacing the rear lights and their bulbs of the Renault Scenic. Firs…
How to replace the rear lights and bulbs of the Renault Scenic
How to replace the rear lights and bulbs of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today we will discover the instructions for disassembling and replacing the rear light and its bulbs of the Renault Scenic and Grand Scenic. First, o…
Disassembly of the rear headlight of the Renault Scenic
Disassembly of the rear headlight of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today we will see the steps that will allow us to disassemble and replace the rear taillight and its bulbs of the Renault Scenic. First of all, we op…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos