Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Renault Scenic.

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Tail light

These brief and simple instructions will guide us through the process of disassembling and replacing the rear taillight of the Renault Scenic. First, we open the rear hatch of the trunk and start unscrewing the two fixing screws that we find on the sides of the taillight; then we gently pry on the sides to detach and remove it, disconnecting the electrical connector of the bulbs found on the back, as shown in the video. At this point, we separate the bulb holder from the light fixture if we want to replace the bulbs, replacing either the entire taillight; finally, we reassemble everything!

Posted on 15 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear light on a Renault Scenic
How to disassemble the rear light on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) To remove the rear light on a Renault Scenic 2, here are the general steps to follow. Open the trunk door: this is essential to reach the fixing scre…
How to replace the rear headlight on the Renault Scenic 3
How to replace the rear headlight on the Renault Scenic 3
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) With the help of the following video tutorial, we will show you the steps to replace the rear headlight of the Renault Scenic model mk3 on your own. …
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today's instructions will allow us to remove and replace the bulbs of the rear headlamp on the Renault Scenic. First, open the rear tailgate of the b…

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos