Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light on a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Tail light

To remove the rear light on a Renault Scenic 2, here are the general steps to follow. Open the trunk door: this is essential to reach the fixing screws of the rear light. Use a T20 torx key to unscrew the fixing screws of the lights, which are located on the side. Pull out the light towards the outside, in a comfortable position to work on it. Disconnect the electrical connector of the bulbs: at this point you are able to remove any bulb of the rear light (light or stop) without any problems. It is recommended to use bulbs that are the same or equivalent to the original ones.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Renault Scenic
How to Remove the Rear Light on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) To replace the rear light on a Renault Scenic, open the tailgate to access the screws located between the seal and the light. Once these bolts are lo…
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today's instructions will allow us to remove and replace the bulbs of the rear headlamp on the Renault Scenic. First, open the rear tailgate of the b…
How to replace the rear headlight on the Renault Scenic 3
How to replace the rear headlight on the Renault Scenic 3
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) With the help of the following video tutorial, we will show you the steps to replace the rear headlight of the Renault Scenic model mk3 on your own. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos