Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on the Renault Scenic 3

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

With the help of the following video tutorial, we will illustrate the steps to replace the rear light on the Renault Scenic Mk3 independently. To carry out this operation, undo the lower screw that secures the light and then detach it from its housing.

Disconnect the connector and completely remove the broken light. Insert the new light into its housing and screw it in place, reconnect the connector, and proceed to test the light's functionality.

Before fitting the new light, replace the bulbs by removing the cover and inserting the new bulb.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Headlight on the Renault Scenic
How to Remove the Rear Headlight on the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) To remove the rear headlight on a Renault Scenic 2, follow these general steps. Open the boot lid: this is essential to access the screws securing th…
How to Remove the Rear Light on a Renault Scenic
How to Remove the Rear Light on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) To replace the rear light on a Renault Scenic, open the tailgate to access the screws located between the seal and the light. Once these bolts are lo…
How to Replace the Rear Light of a Renault Scenic?
How to Replace the Rear Light of a Renault Scenic?
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before you begin, open the boot lid. This will expose the screws that secure the light. Start by unscrewing and removing the screws with a Torx screw…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos