Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of a Renault Scenic?

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

See other generations:
Video tutorial

Before you begin, open the boot lid. This will expose the screws that secure the light. Start by unscrewing and removing the screws with a Torx screwdriver.

Then, remove the light by disengaging it from its housing. Once the light is removed, to fully disassemble it, detach the bulb holder by unclipping the rear clips that secure it. After completing this step, you will have successfully removed the rear light.

To install the new light, simply follow these instructions in reverse, and you will have successfully completed the replacement.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on Renault Scenic 2
How to Remove the Rear Light on Renault Scenic 2
Renault Scenic (2003-2009 / Scenic 2, MK 2) In today's video, you will learn how to remove the rear light on a second series Renault Scenic by following these simple steps. First, open the boot…
How to Remove the Rear Light on a Renault Scenic
How to Remove the Rear Light on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) To replace the rear light on a Renault Scenic, open the tailgate to access the screws located between the seal and the light. Once these bolts are lo…
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today's instructions will allow us to remove and replace the bulbs of the rear headlamp on the Renault Scenic. First, open the rear tailgate of the b…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos