Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on Renault Scenic 2

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Tail light

In today's video, you will learn how to remove the rear light on a second series Renault Scenic by following these simple steps. First, open the boot lid and use a T20 Torx key to unscrew the fixing screws of the lights, which are located on the sides; then pull it outwards and disconnect the electrical connector of the bulbs, as shown in the video. At this point, press the tabs to access the inside of the light and replace any non-functioning bulbs; follow the video to the end for reassembly!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulb on a Renault Scenic?
How to Replace the Rear Headlight Bulb on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To replace the rear headlight bulbs on the Renault Scenic, you need to remove the entire light unit. Start by removing the panel on the right side of…
How to disassemble the rear light on a Renault Scenic
How to disassemble the rear light on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) To remove the rear light on a Renault Scenic 2, here are the general steps to follow. Open the trunk door: this is essential to reach the fixing scre…
Replacement of the rear taillight bulbs of the Renault Scenic
Replacement of the rear taillight bulbs of the Renault Scenic
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) These short and simple instructions will show us the process of disassembling and replacing the bulbs of the rear light of the Renault Scenic. First …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos