Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the rear light on a Renault Scenic?

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Tail light
Operation: How to replace the rear light on a Renault Scenic?

Before you can leave, you will need to go and open the boot lid. By doing so, we will have discovered the cover of the screws that secure the light on the inside of the trunk. So let's start by removing this cover, and then unscrew and remove the screws with a Torx screwdriver. Subsequently, it will be necessary to proceed by disengaging the light from its seat. When we have removed the light, to disassemble it for good, just detach the bulb holder, unhooking the hooks on the rear side. Once we have completed this step we will have removed the taillight. To reassemble the new headlight, we will simply have to follow these steps in reverse, and we will be done.


Posted on 30 December 2023 by ScegliAuto



How to disassemble the rear light on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) To remove the rear light on a Renault Scenic 2, here are the general steps to follow. Open the trunk door: this is essential to reach the fixing scre
How do you remove the rear light of the Renault Scenic?
Renault Scenic (2003-2009 / MK 2, Scenic 2) In order to replace the rear light of the Renault Scenic you have to open the tailgate, so that you can go and loosen the screws that are located bet
How to change the rear fog light bulb on Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) In today's video tutorial we will see how to disassemble and replace the fog light and its bulb on the Renault Scenic. First, let's move to the rear

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos