Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Renault Scenic 3

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Tail light bulb

To replace the rear headlight bulb of the Renault Scénic model 3, we need to open the trunk and unscrew the three screws located along the side of the headlight. After removing the screws, we remove the headlight from its housing and disconnect the connector to completely remove the headlight. We open the headlight dome to replace the bulbs for the turn signals and position lights. After replacing the bulbs, we close the dome and connect the headlight to the vehicle connector. We screw the screws located on the side and close the trunk. In case of malfunction, we replace the corresponding fuse.

Posted on 7 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Renault Scenic 2
How to replace the rear headlight bulb of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) If you own a Renault Scenic Mk2 and are wondering how to replace the rear headlight bulb, then all you have to do is read the following guide and fol…
How to replace the rear headlight bulb of the Renault Scenic 2
How to replace the rear headlight bulb of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today we will explain how to replace the rear headlight bulb of the Renault Scenic 2. To perform this simple and quick operation independently, we ne…
How to replace the reverse light bulb of the Renault Scenic
How to replace the reverse light bulb of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Below we will see the instructions that will allow us to disassemble and replace the reverse lights of the Renault Scenic. First of all, let's move t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos