Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment of the Renault Scenic

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Glove compartment

See other generations:
Video tutorial

Here are the instructions to remove and replace the glove compartment of the Renault Scenic. First, get in the vehicle on the passenger side and open the glove compartment; then unscrew all the screws found inside on the side to detach and remove the glove compartment, as shown in the video.

Now disconnect the tube found at the back, removing and replacing the glove compartment with the new one; to do this, simply apply the reverse procedure!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Compartment of a Renault Scenic
How to Remove the Glove Compartment of a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before you start, sit in the front passenger seat of your Renault Scenic. Begin by opening the glove compartment door by pulling the opening handle. …
Where are the fuses located in the Renault Scenic?
Where are the fuses located in the Renault Scenic?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) The fuses in the Renault Scenic are entirely located within the single fuse box present in the vehicle: this is situated behind the glove compartment…
How to Remove the Glove Compartment of a Renault Scenic
How to Remove the Glove Compartment of a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before you can start, open the front passenger door of your Renault Scenic. Begin by opening the glove compartment itself. Next, dislodge and remove …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos