Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the TPMS Light on Renault Captur

Model: Renault Captur MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

This tutorial video shows how to reset the tyre pressure monitoring system (TPMS) light on a Renault Captur. First, ensure that all four tyres are correctly inflated; the recommended pressure is found on the driver's door pillar.

Once the tyre pressures are checked, turn on the vehicle's ignition. Then, repeatedly press the UP arrow located on the steering wheel until the tyre pressure message appears on the display.

Next, press and hold the OK button on the steering wheel for five seconds to perform the reset.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to reset the TPMS light on the Renault Captur.
How to reset the TPMS light on the Renault Captur.
Renault Captur (2019-2026 / MK 2) Today we will see how to reset the tire pressure sensors on a Renault Captur vehicle. Before performing the reset of the warning light, it is importa…
How to reset the tyre pressure warning light on the Renault Captur
How to reset the tyre pressure warning light on the Renault Captur
Renault Captur (2019-2026 / MK 2) Let's go through the main steps to reset the tyre pressure warning light on the Renault Captur; before recalibrating the TPMS sensors, ensure all fou…
How to Reset the TPMS Light on a 2020 Renault Captur
How to Reset the TPMS Light on a 2020 Renault Captur
Renault Captur (2019-2026 / MK 2) When the tyre pressure light comes on in a 2020 Renault Captur, it means you need to adjust the tyre pressures. After that, you can focus on resettin…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos