Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Original Renault Armrest

Model: Renault Zoe MK 1 - Years 2013-2024
Part: Checks and maintenance

Learn how to fit the original Renault armrest to the Renault Zoe. You can find it from Renault dealers or on eBay with the code 324852115376 for £159.40 plus £22.95 for shipping. The armrest is already prepared for anchoring and comes with fitting instructions. In the video, you can see the Torx screw we need to use to secure the armrest structure; unscrew it from both sides, insert it into its housing, and secure it very simply. It’s very easy to fit. There is an option to add two rivets on each side, but this requires drilling the plastic bodywork, two holes on each side, and honestly, it's not worth it. The two Torx screws already make it very stable.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the R-Link System of the Renault Zoe
How to Reset the R-Link System of the Renault Zoe
Renault Zoe (2013-2024 / MK 1) In today's video, learn how to reset the R-Link system of the Renault Zoe (this also applies to many other models in the Renault group that use the s…
Guide to Replacing the Traction Battery of the Renault Zoe
Guide to Replacing the Traction Battery of the Renault Zoe
Renault Zoe (2013-2024 / MK 1) Follow the steps to remove and replace the traction battery of the Renault Zoe, as outlined below. First, lift the vehicle and position the suitable …
How to install the shark fin antenna cover on the Renault Zoe
How to install the shark fin antenna cover on the Renault Zoe
Renault Zoe (2013-2024 / MK 1) In this video we can see how to install this shark fin antenna cover. The integrated copper antenna plate will allow for even stronger signal recepti…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos