Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in the Renault Clio 4?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Air filter

The air filter is located inside the engine bay, so to replace it, you must release the front hatch using the lever found inside the cabin on the driver's side. Once the hatch is open, locate the air filter box and remove the cover after unfastening the plastic clips that hold it in place. Extract the old filter, remove it from its housing, and insert a new filter in its place. Reposition it inside the filter box, which you must now close with its cover, securing it with the clips.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…
How to replace the air filter of the Renault Clio 2012
How to replace the air filter of the Renault Clio 2012
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the engine air filter of your Renault Clio third series (year 2012) is really simple and thanks to the procedure described below, you will …
How to replace the engine air filter of the Renault Clio 5
How to replace the engine air filter of the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) If it is time to replace the engine air filter of your Renault Clio fifth series, all you need to do is read the following guide carefully and follow…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos