Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Air filter

In this tutorial, you will learn how to replace the air filter in a Renault Clio. Before proceeding, wait for the engine to cool completely for safety. Start by opening the bonnet, then locate the airbox and disconnect both the thin upper ventilation hose and the front collector. Once done, using a 10mm socket spanner, undo the two securing bolts at the back, remove the upper half of the box, and extract the old filter. Finally, fit the replacement by following the reverse procedure and clean any residue from the housing.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…
How to Replace the Air Filter in a Renault Clio 4
How to Replace the Air Filter in a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The video illustrates how to replace the air filter in a fourth-generation Renault Clio. First, switch off the vehicle and remove the key, then open …
How to Replace the Air Filter on the Renault Clio 1.5 DCI
How to Replace the Air Filter on the Renault Clio 1.5 DCI
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this brief and simple guide, follow the necessary steps to remove and replace the engine air filter on the Renault Clio 1.5 DCI. First, open the b…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos