Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Captur
    4. : How to change the battery of the Renault Captur.

Renault Captur - Video tutorial

Model: Renault Captur MK 1 - Years 2013-2019
Part: Key
Operation: How to change the battery of the Renault Captur.

If we realize that the remote control of our car is not working, we need to replace the battery of the remote control. In the description below, we will find the information and various steps to follow to complete the replacement. After removing the electronic key, first remove the emergency key with a pointed object, and then lever the junction between the remote control and the cover to remove the latter. In this way, we can access the compartment that contains the battery and proceed to replace it by always extracting it with a pointed object. Then, take the new battery and place it in the compartment and then proceed to close the cover.


Posted on 17 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Captur 2013-2019 - Why is the Renault Captur remote control not working anymore? Read Answer
    • Captur 2019-2025 - Where to insert the electronic key on the Renault Captur? Read Answer
    • Captur 2013-2019 - What causes Renault Captur starting problems? Read Answer
    • Captur 2019-2025 - What to do when the Renault Captur key card is not recognized? Read Answer
    • Captur 2019-2025 - Why does the Renault Captur remote control not work? Read Answer
    • Captur 2013-2019 - What to do if the Renault Capture key does not work? Read Answer
    • Captur 2019-2025 - What to do when the Renault Captur remote control does not work? Read Answer
    • Captur 2013-2019 - How to change the battery of the Renault Captur remote control? Read Answer
    • Captur 2013-2019 - How to replace the battery in the key of a Renault Captur? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos