Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Tyre Pressure Warning Light on a Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Tire pressure warning light

This video explains a specific situation that may arise when the tyre pressure warning light remains illuminated, despite proper checks on the Renault Clio. If the light stays on even after confirming that the tyre pressure is good, the issue lies elsewhere. As shown in the video, the problem is related to the efficiency of the shock absorbers. The tyre pressure works through the ABS speed. It can happen that the light comes on because the shock absorbers are worn. With worn shock absorbers, the ABS detects the change in wheel speed, triggering the warning light, even when the tyre pressure is optimal.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Renault Clio?
How do you reset the tire pressure light on the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) It will be possible to completely make the tire pressure warning light disappear that is shown on the instrument panel of the Renault Clio by turning…
How to Disable the Speed Limiter on the Renault Clio
How to Disable the Speed Limiter on the Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today, let's discover the steps that will allow us to activate and deactivate the speed limiter on the Renault Clio by following the instructions bel…
How to Disable Traction Control on the Renault Clio?
How to Disable Traction Control on the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To disable the traction control on the Renault Clio, connect the diagnostic tool to the OBD port of the vehicle, located below the steering column. O…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos