Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Renault Espace

Model: Renault Espace MK 4 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Next, we will see the procedure necessary to reset the service light for the routine maintenance oil change on the Renault Espace. First, get into the vehicle and turn on the instrument panel; then press the central button located on the right lever, holding it until the service message appears on the instrument display, as shown in the video.

At this point, press and hold the same button for ten seconds; the message will then flash for five seconds before resetting completely!


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on a Renault Espace
Resetting the Service Light on a Renault Espace
Renault Espace (2023-2026 / MK 6) Today, we will discover the steps to reset the service light for routine maintenance on a Renault Espace. First, get into the vehicle and turn on the…
How to reset the "Service" light on a Renault Espace?
How to reset the "Service" light on a Renault Espace?
Renault Espace (2015-2022 / MK 5) To reset the "Service" light on a Renault Espace, start by turning on the dashboard without starting the engine. Use the buttons on the steering whee…
How to Reset the Service Light on a Renault Espace?
How to Reset the Service Light on a Renault Espace?
Renault Espace (2015-2022 / MK 5) In this tutorial, see how to reset the service light on a Renault Espace. This operation is extremely simple and quick, and should only be done after…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos